Factory Settings For Orbi Router Model Rbr40 - NETGEAR Orbi RBR50 User Manual

Table 4. Factory default settings for the router (Continued)
Feature
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
WiFi WiFi communication
SSID name
Security
Broadcast SSID
Transmission speed
Country/region
RF channel
1
Maximum wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput can vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and
network overhead, lower actual data throughput rate.

Factory settings for Orbi router model RBR40

The following table shows the factory default settings for the router.
Supplemental information
Orbi WiFi System
Default Setting
Disabled (except traffic on port 80,
the HTTP port)
Enabled (all)
Disabled
Enabled
See router label
WPA2-PSK (AES)
Enabled
1
Auto
United States in the US; otherwise,
varies by region
2.4GHz front and back haul: Auto
5 GHz front haul:
• Channel 48 for NA, PR,AU, CA,
and TW
• Channel 36 for EU, KO, JP, and
IN
5 GHz back haul:
• Channel 157 for NA, PR, AU, CA,
and TW
• Channel 108 for EU, KO, JP, and
IN
143 User Manual