Table of Contents
Advertisement
Fan Module LEDs
Fan Module LEDs
The fan module LED is located below the air holes on the front of the module.
LED
STS
Power Supply LEDs
The power supply LEDs are located on the left front portion of the power supply. Combinations of states
indicated by the Okay (
table.
LED
Green
Flashing
green
Off
Cisco Nexus 93180LC-EX NX-OS Mode Hardware Installation Guide
54
LED
(port)
Green
Amber
Off
Color
Status
Green
The fan module is operational.
Red
The fan module is not operational (fan is probably not functional).
Off
Fan module is not receiving power.
) and Fault (
Status
LED
Off
Power supply is on and outputting power to the switch.
Off
Power supply is connected to a power source but not outputting power to the
switch—power supply might not be installed in the chassis.
Off
Power supply is not receiving power.
Color
) LEDs indicate the status for the module as shown in the following
Status
Port admin state is 'Enabled', SFP
is present and the interface is
connected (that is, cabled, and the
link is up).
Port admin state is 'Disabled, or the
SFP is absent, or both.
Port admin state is 'Enabled' and
SFP is present, but interface is not
connected.
LEDs
Advertisement
Table of Contents
