RM-240
BB Troubleshooting and Manual Tuning Guide
Measurement data
Figure 11 Single-ended output waveform of the Ext_in_HP_out measurement when earpiece is connected.
If a special low-pass filter designed for measuring digital amplifiers is unavailable, the measurement must be performed with a
current probe and the input signal frequency must be 2kHz.
Figure 12 Differential output waveform of the Ext_in_IHF_out loop measurement when speaker is connected.
Page 3 –38
COMPANY CONFIDENTIAL
Issue 1
Copyright © 2007 Nokia. All rights reserved.