Nokia 6500 SLIDE RM-240 Service Manual page 30

Page 2 –10
RJ-71
RJ-71 is a rework jig used with ST-26 rework stencil.
RJ-73
RJ-73 is a rework jig used with ST-29.
RJ-93
RJ-93 is used as a rework jig for the engine module.
This stencil takes the front end module (FEM) or power amplifier (PA)
module for spreading the soldering paste to the component. Must be
used together with the ST-40 stencil.
SB-6
The SB-6 test box is a generic service device used to perform Bluetooth
bit error rate (BER) testing, and establishing cordless FBUS connection
via Bluetooth. An ACP-8x charger is needed for BER testing and an
AXS-4 cable in case of cordless interface usage testing .
Sales package includes:
• SB-6 test box
• Installation and warranty information
COMPANY CONFIDENTIAL
Copyright © 2007 Nokia. All rights reserved.
Service Devices and Service Concepts
Rework jig
Rework jig
Rework jig
Bluetooth test and
interface box (sales
package)
RM-240
Issue 1