AEG BE731410HM User Manual page 12

Table of Contents

Advertisement

12
www.aeg.com
Clock function
00:00
7.2 Setting and changing the
time
After the first connection to the mains,
wait until the display shows
"12" flashes.
1. Touch
2. Touch
3. Touch
4. Touch
The display shows the new time.
To change the time of day touch
again and again until
7.3 Setting the DURATION
1. Set an oven function and
temperature.
2. Touch
starts to flash.
3. Use
DURATION time.
4. Touch
starts automatically after 5 seconds.
5. Use
DURATION time.
6. Touch
starts automatically after 5 seconds.
When the set time ends, an acoustic
signal sounds for 2 minutes.
setting flash in the display. The appliance
deactivates.
SET+GO
MINUTE MINDER
COUNT UP TIMER
and 12:00.
or
to set the hours.
or
.
or
to set the minutes.
or
.
starts to flash.
again and again until
or
to set the minutes for
or the DURATION time
or
to set the hours for
. The DURATION time
Application
To start the appliance with necessary settings with only
one touch of the sensor field any time later.
To set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE
MINDER at any time and also when the appliance is off.
To set the count up, which shows how long the appli-
ance operates. This function has no effect on the opera-
tion of the appliance. It is on immediately when the oven
starts to heat. The COUNT UP TIMER is not activated if
DURATION and END are set.
7. Touch a sensor field or open the
oven door to stop the acoustic
signal.
8. Turn off the appliance.
7.4 Setting the END
1. Set an oven function and
temperature.
2. Touch
starts to flash.
3. Use
minutes and then the hours.
When the set time ends, an acoustic
signal sounds for 2 minutes.
time setting flash in the display. The
appliance deactivates automatically.
4. Touch a sensor field or open the
oven door to stop the acoustic
signal.
5. Turn off the appliance.
7.5 Setting the TIME DELAY
function
1. Set an oven function and
temperature.
2. Touch
starts to flash.
3. Use
DURATION.
and time
4. Touch
5. Use
DURATION.
again and again until
or
to set the END and
or
to confirm. First you set the
again and again until
or
to set the minutes for
.
or
to set the hours for
and the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Be731410nmBe731442hmBe731442nm

Table of Contents