Yamaha 2009 WR250R Owner's Manual page 22

INSTRUMENT AND CONTROL FUNCTIONS
1 2
1
2
3
3
1. Stopwatch indicator "
2. Tripmeter A indicator "
4
Distance-compensation tripmeter "
3. Tripmeter B indicator "
5
TIP
G The multi-function display can be
6
set to the basic mode or the mea-
surement mode.
7
G
Tripmeter A will automatically re-
set to zero when changing from
8
the basic mode to the measure-
ment mode or vice versa.
9
Basic mode:
G
a speedometer
G
an odometer
G
two tripmeters (which show the
distance traveled since they were
last set to zero)
G
a fuel reserve tripmeter (which
shows the distance traveled since
the fuel level warning light came
on)
G a clock
G
a self-diagnosis device
Measurement mode:
G
" a speedometer
"/ G a distance-compensation tripme-
"
ter (which shows the accumulated
"
distance traveled since set to zero
and which can be calibrated to pro-
vide a more accurate tripmeter
reading)
G
a stopwatch (which shows the time
that has been accumulated since
the start of stopwatch measure-
ment)
G
a self-diagnosis device
TIP
G
Be sure to turn the key to "ON" be-
fore using the "SELECT 1",
"SELECT 2" and "RESET" but-
tons.
G When the key is turned to "ON", all
Basic mode
Odometer and tripmeter modes
Push the "SELECT 2" button to switch
the display between the odometer
mode and the tripmeter modes A and B
in the following order:
odometer → tripmeter A → tripmeter B
→ odometer
1. Tripmeter A indicator "
4-4
of the display segments of the
multi-function display will appear
and then disappear, in order to test
the electrical circuit.
1
"