Quick Start; Suggested Settings - Fishman Loudbox Owner's Manual

QUICK START

Please read your Owner's Manual before powering up your Loudbox. Here's what you need to do to plug
in and play.
If your amplifier has an operating voltage of 120V, plug the provided AC line cord into the back of the
amplifier. For an amplifier that operates at 240V you must supply your own detachable power cord. The cord
you supply must have an IEC style 320 connector at one end, and a male AC plug appropriate for your area
at the other.
1. Make sure the Loudbox is switched OFF.
2. Plug the Loudbox into an electrical outlet with the appropriate AC voltage.
NOTE: Do not defeat the ground prong on the AC cable; the safe operation of this
amplifier depends on a proper ground connection.
3. Push the Mute switch to the IN position and make sure the Volume is turned down.
4. Connect your acoustic instrument to the Input of the Loudbox with a shielded 1/4"
cable.

Suggested Settings:

TM
5. Turn the Loudbox on.
6. Push the Mute switch to the OUT position and slowly turn the volume knob up to
the desired volume level.
If your pickup system has a volume control, turn it up a high as possible without
causing the amp to distort.
4