Setup; Loose Parts - Toro 41163 Operator's Manual

Setup

Note: Determine the left and right sides of the machine from the normal operating position.
To use the sprayer, you must obtain and install a boom kit and nozzles. Contact your Authorized Toro Distributor for
information on the available boom kits and accessories. After you install your booms and nozzles and before using the
sprayer for the first time, adjust the boom bypass valves so that the pressure and application rate remains the same for all
booms when you turn one or more booms off. Refer to Adjusting the Boom Bypass valves, page 26.
Without a boom kit installed, the sprayer may spray chemicals out of the boom valves, possibly
injuring bystanders or causing property damage.
Do not run the sprayer without a boom kit and nozzles installed.

Loose Parts

Note: Use the chart below to verify that all parts have been shipped.
Description
90 degree fitting
Quick coupler
Hose adapter
Fill receptacle bracket
Flange-head bolt, 5/16 x 3/4 inch
Anti-siphon hose
Spray Pro Monitor
Bracket
Flange-head bolt, 3/4 inch
Flange nut, 1/4 inch
Knob
Washer
Carriage bolt
Key
Operator's Manual
Engine Operator's Manual
Operator Video
Parts Catalog
Registration Card
Predelivery Inspection Form
Caution
Qty. Use
1
1
1
Install the anti-siphon fill receptacle.
1
1
1
1
1
2
Install the Spray Pro monitor.
2
2
2
2
2 Use in the ignition switch.
1
Read before operating the machine.
1
1 Watch before operating the machine.
1 Use for ordering replacement parts.
1 Complete and return to Toro.
1 Complete and file in your customer history portfolio.
12