Special Functions In The Lan; (Not For Hipath 500); Leaving A Hunt Group/Group Call - Siemens HiPath 500 Operating Instructions Manual

Special Functions in the LAN (Not for HiPath 500)
Step by Step
rli qli w
or
52

Special Functions in the LAN

(Not for HiPath 500)

If your telephone is operating in a HiPath 5000 RSM en-
vironment, multiple HiPath 3000 systems are intercon-
nected via a LAN (Local Area Network, e.g. proprietary
PC network). Your telephone calls are conducted via the
LAN (PC network).
If this is the case, you must take certain special features
into consideration when performing various functions.
These are described below.

Leaving a Hunt Group/Group Call

Precondition: you belong to the hunt group/group call
Page 47 of another HiPath 3000:
n
Lift the handset.
qhk
Enter the code.
o
Enter the (DISA) call number of the other
HiPath 3000.
r
Enter.
o
Enter the (DISA) call number of your telephone.
r
Enter.
Enter the code for "leave" or "join".
You belong to multiple groups of another
HiPath 3000:
o
Enter the group number for "Join/Leave, directed".