Activating Tone Dialing/Dtmf Suffix-Dialing - Siemens HiPath 500 Operating Instructions Manual

Making Calls – Convenience Functions
Step by Step
Consultation
Consultation
Consultation
Consultation
Consultation
Consultation
qhme
Consultation
28
If the second party does not answer:
Press this key and wait two seconds.
or (depending on the configuration)
Press the key twice.
Adding Up to Five to the Conference (Initiator Only)
Press the key. LED flashes.
o
Call the new party. Announce the conference.
qg
Press the key. Enter the code. The LED goes out,
etc.
Leaving a Conference
t
Replace the handset.
Ending a Conference (Initiator Only)
rg
Press the key. LED flashes. Enter the code.
Removing the ISDN Central Office Party
From the Conference (Only for U.S., Not for
HiPath 500)
Press the key. LED flashes.
Enter the code.

Activating Tone Dialing/DTMF Suffix-Dialing

You can transmit dual-tone multifrequency (DTMF)
signals to control devices such as an answering
machine or automatic information system.
s
You have set up a connection.
Press the key. LED flashes. Enter the code.
qig
o
You can use the keys "0" through "9", "
transmit DTMF signals.
Ending the call also deactivates DTMF suffix
dialing.
Your system may be configured so that you can
start DTMF suffix-dialing immediately after
setting up a connection.
", and "#" to
*