Table of Contents
Advertisement
Notes
– Do not leave any items of laundry
in the drum. They may shrink in
the next wash or discolour
another item.
– Remove any foreign objects from
the drum and the rubber seal –
risk of rusting.
– Leave the door and detergent
drawer open so that any residual
water can dry away.
– Always remove the washing.
– Always wait until the programme
ends, as the appliance could still
be locked.
– If the display panel goes off at the
end of a programme, the energy-
saving mode is active. To
activate, select any button.
H
Sensors
A utomatic load sensing
S e n s o r s
The automatic load-sensing function
perfectly adapts the water consumption
to each programme depending on the
type of fabric and the load.
Unbalanced load detection
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping the drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Place large and small items of
Note:
laundry evenly in the drum.
~ "Faults and what to do about them"
on page 31
VoltMonitor
The automatic voltage control system
detects unauthorised voltage drops
during the washing process.
Whenever there is an
Note:
undervoltage, the colon flashes on the
Ready in display on the display panel.
When the supply voltage is stable again,
the programme continues running. The
colon on the Ready in display stops
flashing.
If the interruption causes the
programme to be extended, the dot on
the display flashes.
The voltage control system is activated
when a program is started.
Sensors
en
27
Advertisement
Table of Contents
