Table of Contents
Advertisement
Operating the appliance
en
If the following appears in the display
panel:
Both the YES and v symbols light
■
up, it is possible to add laundry.
NO and v flash, wait until YES and
■
v light up. Do not open the door
until both the YES and v symbols
light up.
NO lights up, it is not possible to add
■
laundry.
Notes
For safety reasons, the door remains
■
locked when the water level or
temperature is high, or while the
drum is turning, and it is not possible
to add laundry during this time.
Select the Start button to continue
the programme.
Do not leave the door open for a
■
prolonged period - water could run
out of the laundry.
Changing the programme
If you have started a wrong programme
by mistake, you can change the
programme as follows:
Select the Start button to pause the
1.
programme.
Select another programme.
2.
Select Start button for starting the
3.
programme. The new programme
starts from the beginning.
Cancel the programme
For programmes at high temperatures:
Select the Start button to pause the
1.
programme.
To cool down washing: Select q
2.
Rinse programme.
Select the Start button.
3.
For programmes at low temperatures:
Select the Start button to pause the
1.
programme.
26
Select 0 Spin/Drain p (if only a
2.
drain cycle is required: set rpm (spin
speed) to - - -).
Press the Start button again.
3.
Programme end during rinse
hold
- - - appears in the display panel, and
the start button indicator light flashes.
To end the programme:
Select 0 Spin/Drain p (if only a
1.
drain cycle is required: set rpm (spin
speed) to - - -).
Select the Start button.
2.
Programme end
Endappears in the display panel.
If the x symbol also appears in the
display panel, the washing machine has
detected too much foam during the
wash programme and automatically
switched on a rinse cycle to remove the
foam.
Add less detergent to the next
Note:
washing cycle with the same load.
Removing laundry/switching
off the appliance
Open the door and remove the
1.
washing.
Set the programme selector to the
2.
"Off" position. The appliance is
switched off.
Turn off the tap.
3.
Not required for Aqua-Stop models.
Contents of package
Advertisement
Table of Contents
