Related Manuals for Siemens WM SERIES
Summary of Contents for Siemens WM SERIES
- Page 1 Washing machine WM.. siemens-home.com/welcome Register your product online ens-home.com/welcome...
- Page 2 Your new washing machine Display rules : Warning! You have chosen a Siemens washing machine. This combination of symbol and signal word indicates a possibly dangerous Please take a few minutes to read and situation. Not heeding the warning can become familiar with the advantages of cause death or injuries.
-
Page 3: Table Of Contents
Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Intended use. -
Page 4: Intended Use
Intended use Sensors ....27 Intended use Automatic load sensing ..27 Unbalanced load detection This appliance is intended for private ■... -
Page 5: Safety Instructions
Safety instructions If you lean on the washing Safety instructions ■ machine door when it is open, the washing machine Electrical safety may tip over and cause S a f e t y i n s t r u c t i o n s injuries. - Page 6 Safety instructions Warning Warning Danger of death! Risk of poisoning! Children may lock themselves Detergents and care products in appliances, putting their lives may be poisonous if at risk. consumed. For appliances that have Keep detergents and care reached the end of their service products out of the reach of life: children.
-
Page 7: Environmental Protection
Save energy and detergent when ■ authorized collection centers for washing lightly and normally soiled disposal laundry. http://www.siemens-home.com/in/ ~ "Detergent" on page 20 Preserve.html Energy-saving mode: The display ■ See also: panel lighting goes out after a few Contact No: 180042535287 (toll-free) minutes and Start/Reload ! flashes. -
Page 8: Positioning And Connecting
Positioning and connecting ( Mains cable Positioning and 0 Bag: connecting Installation and operating ■ instructions Included with the appliance After-sales service location ■ P o s i t i o n i n g a n d c o n n e c t i n g directory* Check the machine for transport Note:... -
Page 9: Installation Surface
Positioning and connecting If the hose and mains cables are not Order no. WMZ 20490, ■ routed properly, there is a risk of WZ 20490 WZ 20510, WZ 20520 tripping and injury. On wooden joist floors, install the Note: Lay hoses and cables in such a way washing machine: that there is no risk of tripping. -
Page 10: Hose And Cable Lengths
Positioning and connecting Keep the screws and sleeves in Hose and cable lengths Note: a safe place. Left-hand connection ■ Take the hoses out of the holders. Right-hand connection ■ Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. -
Page 11: Water Inlet
Positioning and connecting Water inlet Connection Connect the water supply hose to Warning the water tap (¾" = 26.4 mm) and to Risk of death! the appliance: There is a risk of electric shock if you – Model: Standard touch live components. Observe the following when connecting the machine: Notes... -
Page 12: Water Outlet
Positioning and connecting Water outlet Make sure that: – The plug does not block drainage from the sink. Caution! – The end of the drain hose is not Water damage immersed in the drained water. If the drain hose slips out of the wash –... -
Page 13: Levelling
Positioning and connecting Levelling Observe the following information and ensure that: Level the appliance using a spirit level. Notes Incorrect levelling may result in intense The mains voltage and voltage ■ noise, vibrations and "wandering". indicated on the washing machine (rating plate) are the same. -
Page 14: Before Washing For The First Time
Positioning and connecting Before washing for the first Grounding Instructions time Warning Danger of death! The washing machine was thoroughly Improper connection of the ground may tested before leaving the factory. In result in electric shock. Have the order to remove any water which may appliance checked by a qualified be left over from the test, run the first technician or licensed electrician if you... -
Page 15: Transportation
Positioning and connecting Transportation Installing the transport locks: Remove the covers and keep them e.g. when moving home in a safe place. Use a screwdriver if necessary. Preparatory work: Turn off the water tap. Reduce the water pressure in the supply hose. -
Page 16: Getting To Know The Appliance
Getting to know the appliance Getting to know the appliance Washing machine G e t t i n g t o k n o w t h e a p p l i a n c e Detergent drawer Controls/display elements Washing machine door with window handle 9S Open the washing machine door... -
Page 17: Control Panel
Getting to know the appliance Control panel Control panel depending on the model ( programme default settings can be changed Overview of all programme default settings ~ "0 Programme default settings" on page 21 0 Additional programme settings can be selected Overview of all programme settings ~ Page 22 8 Start/Reload for starting,... -
Page 18: Display Panel
Laundry Display panel Settings for the selected programme Cold* - 90 °C Temperature in °C; Cold = cold – – –...1200** Spin speed; ** max. speed In rpm (rotations per minute); depends on the model – – – = Rinse hold (without final spin) 1:30 Programme duration Depends on the programme selection in h:min... -
Page 19: Sorting Laundry
Laundry Sorting laundry Starching Sort your laundry according to the care Laundry must not be treated with Note: instructions and manufacturer's fabric softener. information on the care labels: Starching is possible in all wash Type of fabric/fibre ■ programmes if liquid starch is used. Colour ■... -
Page 20: Detergent
Detergent Saving energy and detergent Detergent For light and normal soiling, you can C orrect selection of detergent save energy (lower washing D e t e r g e n t temperature) and detergent. The care label is crucial for selecting the correct detergent, temperature and Saving Soiling/note... -
Page 21: Programme Default
Programme default settings The maximum speed that can be set Programme default depends on the model and programme that have been selected. settings Overview of programmes You can find possible programme P r o g r a m m e d e f a u l t s e t t i n g s default settings in the overview;... -
Page 22: Additional Programme
Additional programme settings Less iron Adding laundry while the preselected time continues running: (æ) Less iron) Press Start/Reload ! . The symbols YES and v light up on Button depending on the model the display panel. The washing Reduces creasing thanks to a special machine door can be opened and spin sequence followed by fluffing and laundry can be added. -
Page 23: Operating The Appliance
Operating the appliance The following figures are indicated Operating the continuously on the display panel for the selected programme: appliance the programme length, ■ Install and connect washing Note: the preset temperature* (*depending ■ O p e r a t i n g t h e a p p l i a n c e machine properly. -
Page 24: Placing Laundry Into The Drum
Operating the appliance Placing laundry into the drum The indicator light on the Start button flashes, and the default settings for the programme appear continuously on the Warning display panel. Changes may be made Risk to life! to the default settings. Items of laundry pretreated with cleaning agents that contain solvents, Measure and add detergent... -
Page 25: Start The Programme
Operating the appliance Add detergent and/or care products. If you want to lock the Note: programme to prevent it from being inadvertently adjusted, you can select the childproof lock as follows. Childproof lock You can lock the washing machine to prevent the functions you have set from being changed inadvertently. -
Page 26: Changing The Programme
Operating the appliance If the following appears in the display Select 0 Spin/Drain p (if only a panel: drain cycle is required: set rpm (spin speed) to - - -). Both the YES and v symbols light ■ Press the Start button again. up, it is possible to add laundry. -
Page 27: Sensors
Sensors If the laundry is extremely unevenly Notes distributed, the spin speed is reduced – Do not leave any items of laundry or the spin cycle is not performed for in the drum. They may shrink in safety reasons. the next wash or discolour another item. -
Page 28: Setting The Signal
Setting the signal Setting the signal S e t t i n g t h e s i g n a l 1. Activate the setting mode for the signal volume Set to Ú. Press and hold the 0 button and turn one Press and hold the button for position to the right. -
Page 29: Cleaning And Maintenance
Cleaning and maintenance be obtained via our website or from our Cleaning and after-sales service. ~ Page 35 maintenance Detergent drawer and housing Warning C l e a n i n g a n d m a i n t e n a n c e If the washing machine contains Danger of death! detergent or fabric softener residues:... -
Page 30: The Drain Hose At The Siphon Is Blocked
Cleaning and maintenance Open and remove the service flap. To prevent unused detergent Note: from flowing straight into the drain during the next wash: Pour 1 litre of water into compartment II and start the Spin/Drain programme (if only drain cycle is required, set (Spin speed) 0 on - - - ). -
Page 31: Faults And What To Do About Them
Faults and what to do about them Warning Risk of injury! You may injure your hands if you reach into the drum while it is turning. Do not reach into the drum when it is turning. Wait until the drum has stopped turning. -
Page 32: Information On The Display Panel
Faults and what to do about them Information on the display panel Display Cause/remedial action The washing machine door is unlocked. It is possible to add laundry. The temperature is too high. Wait until the temperature falls. ■ Water level too high. Not possible to add laundry. If necessary, close the wash- ■... -
Page 33: Faults And What To Do About Them
Faults and what to do about them Faults and what to do about them Faults Cause/remedial action Water is leaking out. Attach/replace the drainage hose correctly. ■ Tighten the screw connection of the supply hose. ■ No water supply. Start/Reload ! not pressed? ■... - Page 34 Faults and what to do about them Faults Cause/remedial action Residual water in the Not a fault – the effect of the care product is not affected. ■ compartment i for care Clean the insert if necessary. ■ products. Odours in the washing Run the Drum Clean programme without laundry.
-
Page 35: After-Sales Service
After-sales service After-sales service Technical data If you cannot correct the fault yourself Dimensions: A f t e r - s a l e s s e r v i c e T e c h n i c a l d a t a ~ "Faults and what to do about them"... - Page 36 Repair order and advice in the event of faults 0344 892 8999 (Calls charged at local or mobile rate.) 01450 2655 (0.03 € per minute at peak. Off peak 0.0088 € per minute.) BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München GERMANY siemens-home.com *9001190636* 9001190636 (9606)