Table of Contents
Advertisement
Product Overview
Figure 12
1. Handle
2. Control panel
3. Engine
4. Transport wheels
Controls
Figure 13
1. Throttle control
2. Traction & reel drive
engagement lever
Throttle Control
The throttle control (Figure 13) is located on rear right
side of control panel. Lever connects to and operates
throttle linkage to carburetor. Engine speed can be
varied from 2400 RPM to 3600 RPM.
5. Cutting unit
6. Grass basket
7. Fuel tank
3. Service/parking brake
4. On/off switch
Traction and Reel Drive Engagement
Lever
The traction and reel drive engagement lever (Figure 13)
is located on front right side of control panel. Traction
lever has two positions: Neutral and Forward. Pushing
lever forward engages traction drive.
The reel drive lever has two positions: Engage and
Disengage. Move top of lever to the left to engage reel
or back to neutral to disengage reel.
Service/Parking Brake
The service/parking brake (Figure 13) is located on left
front side of control panel. Pulling the lever back over
center will set the parking brake. Brake must be released
before traction drive is engaged.
On/Off Switch
The on/off switch (Figure 13) is located on top of
control panel. Move switch to On position to start
engine and Off to stop engine.
Operator Presence Control
The optional operator presence control must be engaged
before engaging the traction lever or the engine will stop.
Choke Lever
The choke lever (Figure 14) is located on left front of
engine. Lever has two positions: Run and Choke. Move
the choke lever to the half-open position when starting
a cold engine. After engine starts move lever to Run
position.
1. Choke lever
Fuel Shut-Off Valve
The fuel shut-off valve (Figure 14) is located on left
front of engine. Valve has two positions: Closed and
14
Figure 14
2. Fuel shut-off valve
Advertisement
Table of Contents
