Restoring A Nuisance Channel; Call Alert Paging; Receiving A Call Alert Page; Sending A Call Alert Page - Motorola APX 4000 User Manual

Restoring a Nuisance Channel

To restore the deleted nuisance channel, perform
one of the following actions:
• Turn scan off, and then on.
• Change channels.
• Turn off the radio, and then turn it back on.
Nuisance mode delete can be disabled by the
system administrator.

Call Alert Paging

This feature allows your radio to work like a pager.
Even if other users are away from their radios, or if
they are unable to hear their radios, you can send
them an individual Call Alert page. You can also
verify if a radio is active on the system.
Depending on how your radio is programmed, when
you make an Enhanced Private Call, the radio either
automatically sends a call alert page if there is no
answer after the maximum ring time, or when you
press the PTT button.
Note: This feature must be preprogrammed by a
qualified radio technician.

Receiving a Call Alert Page

When you receive a Call Alert page, you hear four
repeating alert tones and the LED blinks green. The
call received icons blinks and the display shows Page
received.
Press any button to clear the Call Alert page.
See
Making a Talkgroup Call
Private Call (Trunking Only)
information on returning the call.

Sending a Call Alert Page

The following methods are options on how to send a
call alert page. The result of all the methods is the
same. You can use the options interchangeably
depending on your preference and the programmed
functions.
Note: If the feature inactivity timer is enabled, your
radio automatically exits the feature when your radio
is left idle long enough for the time to expire. You
hear the Menu Inactive Exit Tone upon feature exit.
• Sending a call alert page via the preprogrammed
Quick Access (One-Touch) Call Alert Paging
button:
on page 62 or
Making a
on page 62 for more
English
79