Talkgroup Call Feature (Conventional Operation Only) - Motorola APX 4000 User Manual

• or
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0
cm) from your mouth.
5 Press and hold the PTT button to start the
Selective Call.
The display shows the ID of the target radio.
6 Release the PTT button to listen.
7 Press
to return to the Home screen.

Talkgroup Call Feature (Conventional Operation Only)

This feature allows you to define a group of
conventional system users so that they can share the
use of a conventional channel.
Note: Encryption keys are associated to talkgroups.
When talkgroups are associated, encryption keys are
changed by changing the active talkgroup. See
Secure Operations
information.
68
English
to the required ID.
on page 99 for more
Selecting a Talkgroup
1
to Tgrp and press the Menu Select button
or
directly below Tgrp.
The display shows the last Talkgroup that was
selected and stored.
2 Perform one of the following actions:
• or to Preset for the preset
preprogrammed Talkgroup.
• or to the required Talkgroup.
3 Press the Menu Select button directly below Sel
to save the currently selected Talkgroup and
return to the Home screen.
If the encryption key associated to the new
Talkgroup is erased, you hear a momentary key
fail tone and the display shows Key fail.
If the encryption key that is associated to the new
Talkgroup is not allowed, you hear a momentary
key fail tone and the display shows Illegal key.
4 Press
to return to the Home screen.