Impres Battery Annunciator - Motorola APX 4000 User Manual

The display shows Tx inhibit on. You hear a
sequence of short, low‐high tones to indicate
transmission is inhibited.
Pressing PTT triggers the radio sounds a constant
short, low‐pitched tone (reject tone).
Note: The status of the Transmit Inhibit does not
change after the radio powers up.
Disabling Transmit Inhibition
Perform one of the following actions:
• Switch the preprogrammed Transmit Inhibit
switch to Transmit Inhibit disabled position.
•
or to TxIn. Press the Menu Select button
below TxIn.
• Press the Transmit Inhibit programmable
button.
Note: If the user has disabled TX Inhibit via the
softkey and then moves the switch to the position
where TX Inhibit is enabled, the new value
overwrites the menu value.
The display shows Tx inhibit off. You hear a
sequence of short, high‐low tone (Transmit Inhibit
Off tone) to indicate transmission is back to normal
operation.

IMPRES Battery Annunciator

This feature displays the current capacity and
charges cycles of your battery when an IMPRES
Battery is powering your radio. This feature must be
enabled in your radio to see the information.
The information shown are:
Rated Capacity
Remaining
Capacity
Estimated
Charges
Accessing the Battery Info screen
1
or to Batt.
2 Press the Menu Select button directly below
Batt.
The display shows the details of the battery.
Percentage of current battery
capacity.
Remaining power of the battery
in mAh.
Number of charges cycles the
battery has gone through.
™
145
English