Pairing With Low Frequency-Motorola Proximity Pairing (Lf-Mpp) Feature - Motorola APX 4000 User Manual

Re-Pair Timer Description
Options
device re-connect, the timer is
reset.
The radio could not control the Drop Timer of
Personal Area Networking (PAN), Dial-Up Networking
(DUN), Commercial Off- The-Shelf (COTS) and data
services. It is depends on the specifications of these
external devices.
Check with your dealer or system administrator for
more information about these timers.
To establish the Bluetooth Connection, see
with Low Frequency-Motorola Proximity Pairing (LF-
on page 119 or
MPP) Feature
on page 121 .
Feature
Pairing with Low Frequency-Motorola Proximity Pairing
(LF-MPP) Feature
Ensure that Bluetooth feature of your radio is on and
the Bluetooth tones are enabled.
Bluetooth tones, Bluetooth menu and preprogrammed
buttons must be preprogrammed by a qualified radio
Pairing
Standard Pairing
technician. Check with your dealer or system
administrator for more information.
The range of Bluetooth operation is 10 meters line-of-
sight communication. This is an unobstructed path
between the location of the signal transmitter (your
radio) and the location of the receiver (your device or
accessory).
Obstacles that can cause an obstruction in the line-of-
sight include trees, buildings, mountains, cars and
etc.
It is not recommended that you leave your radio
behind and expect your accessory to work with a high
degree of reliability when they are separated.
At the fringe areas of reception, both voice and tone
quality will start to sound "garbled" or "broken". To
correct this problem, simply position the accessory
and radio closer to each other (within the 10 meter
defined range) to re-establish clear audio reception.
Note: Once a COTS headset is paired to your radio, it
is always connected. Therefore the battery life of the
accessory is aligned with the Talk Time power
consumption, not the Standby Time consumption.
119
English