Treatment Of Submerged Motor - Yamaha FL150A Owner's Manual

4. Unscrew the filter cup from the filter hous-
ing. NOTICE: Be careful not to twist the
water detection switch lead when un-
screwing the filter cup.
1. Filter cup
2. Water detection switch lead
5. Drain the water in the filter cup by soaking
it up with a rag.
6. Firmly screw the filter cup onto the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when screwing the filter cup onto the
filter housing.
7. Connect the water detection switch cou-
pler securely until a click is heard.
1
1. Water detection switch coupler
[ECM01960]
[ECM01970]
ZMU06223
Trouble Recovery
8. Install the top cowling.
9. Start the engine and make sure that the
water separator-alert indicator remains
off. Have a Yamaha dealer inspect the
outboard motor after returning to port.
EMU33501

Treatment of submerged motor

If the outboard motor is submerged, immedi-
ately take it to a Yamaha dealer. Otherwise
some corrosion may begin almost immediate-
ly. NOTICE: Do not attempt to run the out-
board motor until it has been completely
inspected.
[ECM00401]
83