Adjusting Your Monitor Image; Using The Direct Access Controls - Lenovo ThinkVision X24 Pro User Manual

Adjusting your monitor image

This section describes the control features to adjust your monitor image.

Using the direct access controls

The direct access controls can be used when the On Screen Display (OSD) is not
displayed.
Table 2-1. Direct access controls
Icon Control
Input Source
DDC-CI
1
Increase/Up
Brightness
Low Blue Light
2
Decrease/Down
Menu
3
Enter
Volume
4
Up/Down
Description
Switches the video input source
Press and hold for 10 seconds to enable or disable
the DDC-CI function
Up browsing key
For increasing the value on adjustment bar/tune in
Press to move to last item
Direct access to Brightness adjustment
Press and hold for 3 seconds to enable Low Blue
Light or disable Low Blue Light
Down browsing key
For decreasing the value on adjustment bar/tune in
Press to move to next item
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/un-
lock menu
Press to enter next level on main menu/sub menu
status or enter previous level on adjustment bar
Press to control Speaker Volume up/down
2-3
Chapter 2.