Connecting Input Power (Non-T Models) - Miller LMSW-52 Owner's Manual

3-7. Connecting Input Power (Non-T Models)

Model
1.5 kVA 110 Volt
2.5 kVA 220 Volt
1 2
Input Conductor
Size (AWG)
No. 10
No. 10
5
3 4
Or
Fuse/Circuit Breaker
Size In Amperes
30
30
Y Input power supply wiring
and receptacle must meet
National Electrical Code and
all other code requirements.
Operate spot welder from a sepa-
rately fused or circuit breaker pro-
tected circuit, and use correct size
input conductors.
1 Rating Label
2 Cord
3 Parallel Plug On 110 Volts AC
Models
4 Tandem Plug On 220 Volts
AC Models
Do not cut ground terminal off plug.
5 Grounded Receptacle
Connect plug to matching
grounded receptacle.
Ref. ST-800 156
OM-716 Page 11