Brother DCP-L5500DN Basic User's Manual page 61

Error Message
Print Unable ##
Received Fax ##
Replace Toner
Scan Unable
Scan Unable ##
Cause
The machine has a
mechanical problem.
An unprinted received fax
is waiting to print on the
correct size paper.
The toner cartridge is at
the end of its life. The
machine stops all print
operations.
While memory is
available, faxes are
stored in the memory.
The document is too long
for 2‑sided scanning.
The machine has a
mechanical problem.
Action
• Press and hold
machine, wait a few minutes, and
then turn it on again.
• If the problem continues, contact
Brother Customer Service.
Contact Brother Customer Service at:
1-877-BROTHER (1-877-276-8437)
(in USA)
www.brother.ca/support (in Canada)
or to locate a Brother Authorized
Service Center, visit:
http://www.brother-usa.com/service
To print the received fax, load the
correct size of paper in the tray indicated
on the LCD. Paper sizes available for
fax printing are Letter, Legal, Folio and
A4.
Replace the toner cartridge with a new
one.
Press . For 2-sided scanning, use
Letter, Legal, or Folio size paper. Other
paper must be within the following size:
Length: 5.8 to 14.0 in. (147.3 to 355.6
mm)
Width: 4.1 to 8.5 in. (105 to 215.9 mm)
• Press and hold
machine, and then turn it on again.
• If the problem continues, contact
Brother Customer Service.
Contact Brother Customer Service at:
1-877-BROTHER (1-877-276-8437)
(in USA)
www.brother.ca/support (in Canada)
or to locate a Brother Authorized
Service Center, visit:
http://www.brother-usa.com/service
to turn off the
to turn off the
48