Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items - Yamaha RX-V483 Owner's Manual

Configuring the system settings (ADVANCED SETUP menu)

Configure the system settings of the unit while viewing the front display.
1
Set the unit to standby mode.
2
While holding down STRAIGHT on the front panel, press
z (power).
z (power)
PROGRAM STRAIGHT
3
Press PROGRAM to select an item.
4
Press STRAIGHT to select a setting.
5
Press z (power) to set the unit to standby mode and turn it on
again.
The new settings take effect.

ADVANCED SETUP menu items

Note
Default settings are underlined.
Item Function
(U.S.A. and Canada models only)
SP IMP.
Changes the speaker impedance setting.
REMOTE ID Selects the unit's remote control ID.
(Asia, Taiwan and General models only)
TU
Changes the FM/AM tuning frequency setting.
TV FORMAT Switches the video signal type of HDMI output.
4K MODE Selects the HDMI 4K signal format.
INIT Restores the default settings.
UPDATE Updates the firmware.
VERSION Checks the version of firmware currently installed on the unit.
97
En
Page
p.98
p.98
p.98
p.98
p.99
p.99
p.99
p.99