Hdmi - Yamaha RX-V483 Owner's Manual

HDMI

Configures the HDMI settings.
Note
Default settings are underlined.
n
HDMI Control
Enables/disables HDMI Control (p.116).
Settings
Off Disables HDMI Control.
Enables HDMI Control.
On
Configure the settings in "TV Audio Input", "Standby Sync", "ARC", and
"SCENE".
Note
To use HDMI control, you need to perform the HDMI Control link setup (p.116) after connecting HDMI
Control-compatible devices.
n
Audio Output
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
Off Disables the audio output from the TV.
On Enables the audio output from the TV.
Note
This setting is available only when "HDMI Control" is set to "Off".
n
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the
unit is in standby mode. If this function is set to "On" or "Auto", you can use the input
selection keys (HDMI 1–4) to select an HDMI input even when the unit is in standby
mode (the standby indicator on the unit blinks).
Settings
(When "HDMI Control" is set to "Off")
Off
Does not output videos/audio to the TV.
Automatically selects whether to output videos/audio depending on the
Auto
status of the connected device.
Outputs videos/audio to the TV.
On
(The unit consumes more power than when "Off" is selected.)
n
4K Upscaling
Enables/disables the upscaling function. When it is enabled, 1080p content is
displayed at 4K resolution.
Settings
Off Disables the upscaling function.
On Enables the upscaling function.
n
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when "HDMI
Control" is set to "On". The unit's input source automatically switches to TV audio when
the TV input is switched to its built-in tuner.
Settings
AV 1–3, AUDIO 1–3
Default
AUDIO1
Note
When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an
external device because the input will be used for TV audio input.
84
En