Yamaha RX-V483 Owner's Manual page 76

Enhancer (Enhancer)
Enables/disables Compressed Music Enhancer (p.50).
Note
▪ This setting is applied separately to each input source.
▪ You can also use ENHANCER on the remote control to enable/disable Compressed Music Enhancer
(p.50).
Settings
Off (Off) Disables Compressed Music Enhancer.
On (On) Enables Compressed Music Enhancer.
Default
TUNER, (network sources), AirPlay, SERVER, NET RADIO, Bluetooth, USB: On
(On)
Others: Off (Off)
n
Volume Trim (Volume Trim)
Fine-adjusts volume difference between input sources or subwoofer volume.
Input Trim (In.Trim)
Corrects volume differences between input sources. If you are bothered by volume
differences when switching between input sources, use this function to correct it.
Note
This setting is applied separately to each input source.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
Subwoofer Trim (SW.Trim)
Fine-adjusts the subwoofer volume.
Setting range
-6.0 dB to 0.0 dB to +6.0 dB (0.5 dB increments)
n
Lipsync (Lipsync)
Enables/disables the adjustment configured in "Lipsync" (p.87) in the "Setup" menu.
Note
This setting is applied separately to each input source.
Settings
Off (Off) Disables the "Lipsync" adjustment.
On (On) Enables the "Lipsync" adjustment.
n
Signal Info. (Signal Info.)
Displays information about the video/audio signal.
Choices
Format (FORMAT) Audio format of the input signal
The number of source channels in the input signal (front/surround/LFE)
Channel (CHANNEL)
For example, "3/2/0.1" means 3 front channels, 2 surround channels, and
LFE.
Sampling (SAMPLING) The number of samples per second of the input digital signal
Video In (VIDEO IN) Type and resolution of the input digital signal
Video Out
Type and resolution of the output digital signal
(VIDEO OUT)
Note
To switch the information on the front display, press the cursor keys (q/w) repeatedly.
76
En