Table of Contents
Advertisement
CARE &
CLEANING:
MAINTENANCE
CAUTION: MAKE SURE THAT THE
MOTOR BASE IS UNPLUGGED FROM THE
POWER SOURCE BEFORE INSERTING
OR REMOVING ANY ATTACHMENT AND
BEFORE CLEANING.
CAUTION: DO NOT IMMERSE THE MOTOR
BASE INTO WATER OR ANY OTHER
LIQUID.
CAUTION: HANDLE BLADES CAREFULLY
AS THE BLADES ARE VERY SHARP.
1
Separate/remove all parts from each other.
2
Clean the motor base with a damp cloth and
wipe dry.
NOTE: The Double Wall Stainless Steel Nutri
Ninja
Cup is NOT dishwasher safe.
®
3
Place the cups, lids, blade assemblies, discs,
pitcher, and bowl in the top rack of the
dishwasher.
4
Carefully hand wash the cups, lids, blade
assemblies, discs, pitcher, and bowl in warm,
soapy water with a soft cloth.
NOTE: If the appliance needs servicing, please
call Customer care at: AUST: 1800 890 840 or
NZ: 0800 002 999.
STORING:
1
Store the Nutri Ninja Auto-iQ
System upright. Secure the power cord on the
back of the base by wrapping the cord around
the cord wrap. Do not place anything on top
of the unit. Store the cups and the rest of the
attachments where they will not be damaged
and won't cause a hazard.
OR
N Z : 0 8 0 0 0 0 2 9 9 9
®
RESETTING THE MOTOR
THERMOSTAT:
Pro Compact
™
The Nutri Ninja Auto-iQ Pro Compact System
features a safety system that prevents damage
to the unit's motor and drive system should you
inadvertently overload the appliance. If the
appliance is overloaded, the motor will stop. To reset
the appliance, follow the resetting procedure below:
1
2
3
4
5
Unplug the appliance from the electrical outlet.
Remove and empty the cup/pitcher/bowl and
ensure that no food is jamming the cutting
blades.
Allow the appliance to cool for approximately
30 minutes.
Re-install the cup/pitcher/bowl onto the
motor base and re-plug the appliance into the
electrical outlet.
Proceed with using the appliance as before
while making sure not to exceed the maximum
recommended capacities.
1 3
Advertisement
Table of Contents
