Assembly from ™ using an electrical appliance, basic safety precautions should the Nutri Ninja cup upon completion of blending. Do not store always be observed, including the following: ingredients before or after blending them in the cup or jar with the blade assembly attached.
Page 4
27 DO NOT attempt to sharpen blade assemblies. Assembly onto the motor base without first assembling the blade 28 DO NOT use the appliance if the blade assembly is bent or damaged. assembly to the Nutri Ninja Cup. ® 29 To reduce risk of injury, never place the blade assembly on the motor 39 THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.
Page 5
Cord Wrap located on back of the motor base. Ice to Snow Crushing Ice to Snow is easy – take ice cubes directly from your freezer, and put in a dry Ninja Cup – use the pulse feature in short quick bursts until it’s a snow-like consistency.
Page 6
Spout Lid Pro Extractor Blades Assembly ™ Nutri Ninja ® Cups NOTE: Spout lid and Pro Extractor Blades can be used CAUTION: Do not with all Ninja Cups. ® blend hot liquids. 650 ml 900 ml Stacked Blade Assembly (pitcher) Pitcher/Lid...
Assembly with care, as the blades are sharp. ™ WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be damaged or to shatter, which may cause personal injury. WARNING: Never leave the appliance unattended while in use.
WARNING: Never leave the appliance unattended while in use. CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the user being burned. IMPORTANT: Make sure that the motor base is plugged in for use. NOTE: Ninja ® Auto-iQ ®...
Page 9
FOR THE 2.1 L PITCHER (Max Liquid Capacity: 2 L) fig. 8 fig. 9 fig. 10 fig. 11 REMOVAL NOTE: Ninja Auto-iQ Review warning and caution statements 12 When you have reached your desired 15 For thicker consistencies, first remove the ® ®...
Hand Washing: Wash the containers, lids, NOTE: Do not store blended or unblended Unplug the appliance from the electrical blade assemblies and attachments in warm, ingredients in the Nutri Ninja cup with the outlet. soapy water. When washing the blade blade assembly attached.
Page 11
® TROUBLE- Unit doesn’t turn on: SHOOTING • Make sure the unit is plugged in and the POWER button is pressed. GUIDE • Insert and rotate the container or accessory clockwise in the base until it clicks into place. Display should illuminate. Unit doesn’t turn off: •...
Need help?
Do you have a question about the BL492UK and is the answer not in the manual?
Questions and answers