Remote Control Buttons & Functions; Replacing Remote Control Batteries - Code Alarm PROFESSIONAL Series Owner's Manual

Remote Control Buttons & Functions
4-Button
Transmitter
Lock
Unlock
Trunk
Car Finder
Panic
AUX 1
Shock Bypass

Replacing Remote Control Batteries

4-Button Remote Control (part # CAT4P)
The battery (model CR2032) inside each remote control should last approximately 1
year under normal use. When the battery becomes weak you will notice the remote
control range (the distance from the vehicle the remote control will work) deteriorate
and the small LED on the remote control will dim. To replace the remote control
battery:
1. Unsnap and disassemble the halves of the remote control.
2. Remove the old battery, observing the +/- symbols on the battery
and replace with a new CR2032 battery.
3. Reassemble the halves of the remote control.
4. Test operation of the remote control.
Lock Unlock
X
X
X X
X
Car Find /
Trunk
Panic
X
X
X
X
Operation Method
Press and Release
Press and Release
Push and Hold (3 Sec)
Press and Release
Push and Hold (3 Sec)
Push and Hold (3 Sec)
Press and Release Lock then Press
Lock + Car Find (within 5 Sec)
7