Miele G 6260 Operating Instructions Manual page 69

Problem
The In-operation indica‐
tor is flashing quickly.
The buzzer is sounding.
All the programme indi‐
cators flash when the
door is open.
Fault code  shows in
the display.
Fault :
The buzzer is sounding
continuously.
The drain pump may al‐
so be running, even
with the door open.
Fault :
Cause and remedy
There may be a technical fault.
 Switch the dishwasher off with the  button.
 Switch the dishwasher back on after a few sec‐
onds.
 Select the programme you want.
 Close the door.
If the indicator lights flash again, there is a technical
fault.
 Call the Miele Service Department.
The Waterproof system has reacted.
 Close the stopcock.
 Call the Miele Service Department.
A fault has occurred in the circulation pump.
 Switch the dishwasher off for at least 30 seconds
with the  button.
 Switch the dishwasher back on.
 Select the programme you want.
 Close the door.
If the fault message appears again, there is a techni‐
cal fault.
 Call the Miele Service Department.
Problem solving guide
69