Canon MB5000 series Online Manual page 298

Hide thumbs Also See for MB5000 series:

Table of Contents

• Signal strength is displayed as follows.

• Type of encryption is displayed as follows.

Blank: No encryption

WEP: WEP is set

WPA/WPA2: WPA/WPA2 is set

Click to update the list of access points when your target access point is not detected.

If the target access point is set to a closed network (the stealth mode), click Cancel to return to the

previous screen and enter the network name (SSID) in Network (SSID).

• Make sure that the access point is turned on.

Click to set the network name (SSID) in Network (SSID): on the Wireless LAN sheet.

• The WEP Details screen or the WPA/WPA2 Details screen appears if the selected access

point is encrypted. In this case, configure the details to use the same encryption settings set

to the access point.

• Access points that cannot be used by this machine (including those configured to use different

encryption methods) are displayed grayed out and cannot be configured.

Troubleshooting