First Ride - oset 16.0 ECO Owner's Manual

2. FIRST RIDE:

After the rider understands the controls and is comfortable with them, it's time for
the first ride. For this, the rider must be dressed correctly in suitable safety gear.
Boots, gloves, a helmet and eye protection are necessary. The venue must be
flat, open and safe, with no obstacles of any kind. The machine must be set up
correctly, with the speed set to its lower setting and the throttle response set to
its lowest.
1. Ensure the power is turned off.
2. While an adult supports the bike, and while the side-stand is down,
the rider can get on the bike.
3. The rider now can reach back with their left foot, and put the side-
stand to the up position. Have an adult ready to hold the bike up for
this!
4. Encourage the rider to rock the machine from side to side, and
forward and back, in order to get comfortable.
5. The rider can now switch the machine on.
6. Before turning the throttle, the rider's legs can be splayed forward
and out like outriggers.
7. The rider can now twist the throttle (as slowly as possible) and go.
Encourage them to go and stop, go and stop... using the brakes to
stop. Have a supportive hand on the rear fender whenever
possible.
8. Once comfortable, the rider can try to ride along and lift their feet
onto the pegs as they go.
9. When stopped, turn the power off.
OSET Mini Bikes are designed for off road use only and must not be used
on public roads or sidewalks. Please check and obey all local laws.
If the rider drops the bike, ensure that the power is turned OFF before
lifting the bike. It is good practice to turn the power off whenever there is
WARNING!
OFF ROAD USE ONLY!
CAUTION!
no rider on the bike.
31