Ref 3
Ref 5
6.
To re-install the wheel reverse the above procedures. Ensure the chain is
correctly adjusted and lubricated, the wheel is aligned, and all nuts and bolts
are tight
BRAKE ADJUSTMENT:
A separate owners' manual is provided with full details on brake maintenance
and adjustment. Please read for full information.
The 16.0E is fitted with cable discs front and rear. The 16,0R and 20.0L bikes are
fitted with hydraulic disc brakes, both types need to be set up correctly, the pads
must be equidistant from the disc for maximum efficiency.
Visually inspect the pads as you spin the wheel. Check that alignment is good
and pad to disc distance is even. If adjustments are needed follow the
instructions below:
- Using an Allen wrench, loosen the caliper mounting bolts, allowing the caliper
to move freely from left to right.
Ref 4
Ref 6
20