Motor Performance - oset 16.0 ECO Owner's Manual

5. Reverse the above procedure, ensuring all bolts are tight.
6. Check the wheel for alignment (see section 20), and the chain for tension.
These two pictures show the correct tension. When pushing up on the chain, it
should only move 5-10mm.
Axle Nut (15mm)
Failure to maintain and adjust the chain and align the wheel correctly could result
in the chain jumping off the sprockets, causing a potentially dangerous and
MOTOR PERFORMANCE & MAINTENANCE:
The OSET motor has been designed for high performance. Do not power wash
the motor. Check that the sprocket bolt is tight periodically. Water proof grease
can be applied around the shaft where it enters the motor for additional
protection from the elements. Similarly, a bead of silicone can be applied where
the casings join for additional weather protection.
Chain tensioner nut (10mm).
WARNING!
damaging condition.
17