Miele WT 2798 i WPM Operating Instructions Manual page 9

~
The washer-dryer must be isolated from the electricity supply
when cleaning and maintaining the machine and in the event of a
fault.
~
The Miele "Water protection system" protects from water damage
provided the following conditions have been met:
– the washer-dryer is correctly plumbed in and connected to the
electricity supply;
– if a fault or damage has been identified, the washer-dryer must be
examined by a competent person before further use, and repaired
if necessary.
~
The flow pressure must be at least 100 kPa. It must not exceed
1000 kPa.
~
Faulty components must only be replaced by genuine Miele
original spare parts. Only when these parts are fitted can Miele
guarantee safety standards of the machine.
~
If the electrical connection cable is faulty it must only be replaced
by a Miele approved service technician to protect the user from
danger.
~
The washer-dryer must not be used in a non-stationary location
(e.g. on a ship).
~
Do not make any alterations to the washer-dryer, unless
authorised to do so by Miele.
~
In areas which may be subject to infestation by cockroaches or
other vermin, pay particular attention to keeping the washer-dryer
and its surroundings in a clean condition at all times. Any damage
which may be caused by cockroaches or other vermin will not be
covered by the guarantee.
Warning and Safety instructions
9