FlashLogic FLC-CH(RS)-CH5-[FLRSCH5]-EN Install Manual page 14

01
Close driver door.
02
Re-open driver door to wake up data bus.
03
Insert key into ignition.
ACC ON
OFF START
04
Turn key to ON position.
ACC ON
START
OFF
05
LED will turn solid RED.
06
Within 5 seconds, LED will fl ash GREEN
rapidly.
U.S. Patent No. 8,856,780
Automotive Data Solutions Inc. © 2015
MODULE PROGRAMMING PROCEDURE - STD KEY - 1 OF 1
07
Turn key to OFF position.
ACC ON
START
OFF
08
Remove key.
ACC ON
START
OFF
09
Press UNLOCK on the OEM remote. If vehicle
is not equipped with OEM remote, press
module programming button.
10
Wait, LED will turn solid GREEN for 2 seconds.
11
Module Programming Procedure completed.
FLC-CH(RS)-CH5-[FLRSCH5]-EN
PAGE 14 OF 24
• 20151222
DOC.: #25395
www.flashlogic.com