Sanyo SAP–K91AA Technical & Service Manual page 50

ON/OFF operation button
1 HR. TIMER button
MODE selector button
FLAP button
TIMER ON button
ADDRESS switch
NOTE
Transmitter
Sensor
Display
NIGHT SETBACK
button
TEMP . setting buttons
ON/OFF operation
button
8
Remote Control Unit
Sensor
Display
The illustration above pictures the remote control unit after the cover
has been lowered and removed.
When you press the buttons on the remote control unit, the
appears in the display to transmit the setting changes to the receiver in
the air conditioner.
A temperature sensor inside the remote control unit senses the room
temperature.
Information on the operating conditions is displayed while the remote
control unit is switched on. If the unit is turned off, only the mode that
was set previously is still displayed.
For details, see ''Night Setback Mode''. When you press this button in
the DRY or COOL mode, the
remote control unit will automatically adjust the set temperature to save
energy.
Press the button to increase the set temperature.
Press the button to reduce the set temperature.
This button is for turning the air conditioner on and off.
Transmitter
TEMP. setting buttons
NIGHT SETBACK button
FAN SPEED selector button
TIMER SET button
(which advances the time displayed)
TIMER OFF button
ACL button
/
A/C SENSOR button
Battery compartment
(Pull off the cover to expose the
batteries.)
mark appears in the display, and the
(Cover closed)
mark
OI-005-08EG