Advertisement
Available languages
Available languages
Problem
A shaving
head symbol
has suddenly
appeared on the
display.
An exclamation
mark has
suddenly
appeared on
the display while
charging.
An exclamation
mark,
replacement
reminder and
the cleaning
reminder
have suddenly
appeared on the
display.
Water is leaking
from the
bottom of the
shaver.
The SmartClean
system does not
work when I
press the on/off
button.
Possible cause
This symbol is
a replacement
reminder.
The shaver is
overheated.
The shaving heads
are soiled or
damaged.
During cleaning,
water may collect
between the inner
body and the outer
shell of the shaver.
The SmartClean
system is not
connected to the
mains.
ENGLISH
Solution
Replace the shaving heads
(see chapter 'Replacement').
Disconnect the shaver
from the mains for approx.
10 minutes.
Replace (see chapter
'Replacement') or clean the
shaving heads (see chapter
'Cleaning and maintenance').
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the shaver.
Put the small plug in
SmartClean system and
put the adapter in the wall
socket.
39
Advertisement
