Specifications; Directions For Use - Guardian H1200 Use & Care Instructions Manual

Ultrasonic humidifier
Hide thumbs Also See for H1200:
Table of Contents

Advertisement

Available languages

Available languages

pRODUCT SpECIFICATIONS AND pARTS

SpECIFICATIONS

MODEL NUMbER: H1200, H1210
HUMIDIFYING MODE: Ultrasonic Cool Mist
pOWER SUppLY: AC120V; 60Hz
pOWER CONSUMpTION: 30W (Cool Mist)
TANk CApACITY: 1.5 gallons
SUCCESSIVE HUMIDITY HOURS: Up to approximately 100 hours between tank refills
DIMENSIONS: 7.5"L x 9.75"W x 12.5"H
WEIGHT: 3.97 pounds
Mist Spout
pARTS
Tank
power
plug
Night Light
power/Variable
Control
Speed Dial
Refill Indicator LED
Ultrasonic
Disk
E-4
Mist Diffuser
Mist Tube
Tank Carry
Handle
Tank Lid
base
Dry Air
Exhaust
Night Light LED

DIRECTIONS FOR USE

SET Up
Select a firm, level, flat location - at least six inches (15 cm) from any wall or object for proper air
flow. Place the humidifier on a water-resistant surface, as water can damage furniture and some
flooring. Do not place unit directly on carpet, towels, blankets or other absorbent surfaces.
Guardian Technologies will not accept responsibility for damage caused by water spillage.
FILLING
Make sure unit is unplugged.
1. Separate the tank from the
base of the unit.
3. Pour cool, clean water directly
into the tank. Do not pour anything
but water into the tank.
6. Before turning on make sure there is water in the unit.
2. Flip over water tank and open the
tank lid, turning it to the left.
4. Close the tank lid, turning it to the right.
It is important to FIRMLY secure cap after
filling the tank with water.
5. Attach tank to base of unit.
E-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

H1210

Table of Contents