Table of Contents
Advertisement
Rinse aid
You can adjust the rinse aid dosage for
best results.
The rinse aid dosage can be set from
approx. 0-6 ml.
The factory default setting is 3 ml.
The dosage can turn out to be higher
than the set value due to the automatic
adjustment of the Sensor wash pro‐
gramme.
If spots appear on crockery and glass‐
ware:
– Increase the rinse aid dosage.
If clouding or smearing appears on
crockery and glassware:
– Decrease the rinse aid dosage.
Select the rinse aid dosage you want
and confirm this with OK.
Consumption (EcoFeedback)
You can programme the dishwasher so
that the energy and water consumption
of the currently selected programme
appears in the display. The estimated
consumption can be displayed before
the programme starts and the actual
consumption can be displayed after the
programme has finished.
In this menu you can also call up the to‐
tal energy and water used in all previ‐
ous dishwasher programmes (see "Car‐
ing for the environment - EcoFeedback
consumption indicator").
Consumption indicator
Select the
Display
with OK.
Select the setting you want and con‐
firm with OK.
Total consumption
Select the
Total consumption
and confirm with OK.
You can call up the values for
and
with the arrow but‐
Water
tons.
You can also reset the values for the to‐
tal consumption to 0.
Select the
Reset
with OK.
Select the
Yes
with OK.
Confirm the message with OK.
The values are now reset to 0.
Settings menu
option and confirm
option
Energy
option and confirm
option and confirm
95
Hide quick links:
Advertisement
Table of Contents
