Table of Contents
Advertisement
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Screen Controls
Advanced Setup
Option
OSD Setting
Exit
Input Signal : HDMI
To use the controls:
1.
Press
2.
Use
or
function. If there is a sub-menu, you can move between options using
press
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
adjustments to the OSD. Press and hold
adjustments to the OSD.
5.
Enables DDC/CI by default. Use OSD Exit Key, press and hold
disable / enable DDC/CI function. A message "DDC/CI disable" is shown on the screen.
6.
The ENERGY STAR option resets all user settings to default values so that the monitor
can meet the requirements of Energy Star.
Energy Star is an energy saving program for consumer electronics led by the U.S.
government. It was launched in 1992 by EPA and DOE to reduce energy consumption and
greenhouse gas emissions. Energy Star logo is a symbol of energy conservation and
environmental protection. It improves the concept of energy efficiency of consumers and
manufacturers, and effectively guides the market.
S27q-10
®
Brightness
80
Contrast
85
Resolution : 2560x1440
Color Mode : Reddish
to open the main OSD menu.
to move among the icons. Select an icon and press
to select that function. Use
for 10 seconds to lock the OSD. This will prevent accidental
or
to make adjustments then press
for 10 seconds to unlock the OSD and allow
to access the selected
or
, then
to save.
for 10 seconds to
2-4
Chapter 2.
Advertisement
Table of Contents
