Specifications - Teknetics T 2+ Comprehensive Operating Manual & Manual

Professional metal detector
Table of Contents

Advertisement

SPECIFICATIONS

Mechanical: S-rod with electronics housing mounted on handgrip, 3-piece breakdown,
batteries under elbow, 2-way armrest adjustment — forward/backward & around forearm.
Searchcoil: 11" (28 cm) open-frame elliptical double-D, waterproof.
Batteries:  4 AA, alkaline or NiMH (not included).
Weight:  3.5 pounds (1.6 kg) with alkaline batteries installed.
Static Balance: force in vertical plane normal to elbow 0.47 pounds (0.22 kg).Varies with
adjustment and user's stance and arm/hand physiology.
Dynamic Balance: axial moment, 0.29 foot-pounds (0.39 newton-meters). Varies with
adjustment and user's stance and arm/hand physiology.
Sweep Effort:  lateral moment 5.2 foot-pounds (7.1 newton-meters).
Operating Principle:  VLF induction balance
Operating Frequency:  nominal 13 kHz, quartz crystal timing reference
Basic Sensitivity: 5 x 109 root Hertz  (detectivity)
Lag Coefficient:   70 milliseconds
Reactive Overload:  approximately 10,000 micro-cgs units (volume susceptibility)
Resitive Overload:   approximately 1,200 micro-cgs units (volume susceptibility) 
Ground Cancellation Range:   From ferrite to salt, inclusive
Discrimination Ground Suppression:  combination of second and third order methods
ID Ground Suppression:  third order
Battery Life:  typically 40 hours with good quality alkaline, somewhat less with NiMH rechargeable.
Operating Temp Range:  -4 to +122 degrees F (-20 to +50 degrees C)
Operating Humidity Range:  0-90% non-condensing
Comprehensive Operating Manual & Guide to Metal Detecting
TEKNETICS
9

Advertisement

Table of Contents
loading

Table of Contents