Fujitsu ASBA24JFC Operating Manual

Cool model room air conditioner wall mounted type

Advertisement

COOL MODEL
ROOM AIR CONDITIONER
WALL MOUNTED TYPE
Indoor Unit
ASBA24JFC
Outdoor Unit
AOBR24JFC
KEEP THIS OPERATION MANUAL
FOR FUTURE REFERENCE
GUARDE ESTE MANUAL DE USO PARA
FUTURAS CONSULTAS
GUARDE ESTE MMANUAL DE FUNCIONANENTO
PARA REFERÊNCIA FUTURA
FUJITSU GENERAL LIMITED
OPERATING MANUAL
MANUAL DE FUNCIONAMIENTO
MANUAL DE INSTRUÇÕES
P/N9315345332-03

Advertisement

Table of Contents
loading

Summary of Contents for Fujitsu ASBA24JFC

  • Page 1 COOL MODEL ROOM AIR CONDITIONER WALL MOUNTED TYPE Indoor Unit ASBA24JFC Outdoor Unit AOBR24JFC KEEP THIS OPERATION MANUAL FOR FUTURE REFERENCE GUARDE ESTE MANUAL DE USO PARA FUTURAS CONSULTAS GUARDE ESTE MMANUAL DE FUNCIONANENTO PARA REFERÊNCIA FUTURA FUJITSU GENERAL LIMITED P/N9315345332-03...
  • Page 2 Fig. 1 MANUAL AUTO Fig. 2 OPERATION TIMER SUPER QUIET Fig. 3 Fig. 5 Fig. 4 Fig. 6 Fig. 7 To facilitate explanation, the accompanying illustra- tion has been drawn to show all possible indicators; in actral operation, however, the display will only show those indicators appropriate to the current operation.
  • Page 3: Table Of Contents

    CONTENTS SAFETY PRECAUTIONS ........En-1 MANUAL AUTO OPERATION ......En-8 FEATURES AND FUNCTIONS ......En-2 ADJUSTING THE DIRECTION OF NAME OF PARTS ..........En-3 AIR CIRCULATION ..........En-9 PREPARATION ............En-4 SWING OPERATION ..........En-10 OPERATION ............En-5 CLEANING AND CARE ........En-10 TIMER OPERATION ..........En-7 TROUBLESHOOTING.........En-13 SLEEP TIMER OPERATION ........En-8 OPERATING TIPS ..........En-15 SAFETY PRECAUTIONS ●...
  • Page 4: Features And Functions

    FEATURES AND FUNCTIONS INVERTER OMNI-DIRECTIONAL AIR FLOW (SWING OPERATION) At the start of operation, a large power is used to bring the room quickly to the desired temperature. Afterwards, the unit Three-dimensional control over air direction swing is possible automatically switches to a low power setting for economic and through dual use of both an UP/DOWN air direction swing and comfortable operation.
  • Page 5: Name Of Parts

    NAME OF PARTS Fig. 1 Indoor Unit Fig. 6 Remote Control Unit 1 Operating Control Panel (Fig. 2) J SLEEP button 2 MANUAL AUTO button K MODE button ● L SET TEMP. button ( When kept on pressing the MANUAL AUTO button for more than 10 seconds, the forced M Signal Transmitter cooling operation will start.
  • Page 6: Preparation

    PREPARATION CAUTION! Load Batteries (Size AAA R03/LR03 × 2) * ● Take care to prevent infants from acciden- tally swallowing batteries. Press and slide the battery compartment lid on the ● When not using the Remote Control Unit for an extended period, remove the batteries to reverse side to open it.
  • Page 7: Operation

    OPERATION To Select Mode Operation Press the START/STOP button (Fig.6 Q). The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) will light. The air conditioner will start operating. Press the MODE button (Fig.6 K) to select the desired mode. Each time the button is pressed, the mode will change in the following order.
  • Page 8 To Stop Operation Press the START/STOP button (Fig. 6 Q). The OPERATION Indicator Lamp (red) (Fig. 3 5) will go out. About AUTO CHANGEOVER Operation ● When AUTO CHANGEOVER operation fi rst selected, the fan will operate AUTO: at very low speed for about one minute, during which time the unit detects the room conditions and selects the proper operating mode.
  • Page 9: Timer Operation

    TIMER OPERATION Before using the timer function, be sure that the Remote Control Unit is set to the correct current time (☞ P. 4). To Use the ON timer or OFF timer To Cancel the Timer Press the START/STOP button (Fig. 6 Q) Use the TIMER button to select “CANCEL”.
  • Page 10: Sleep Timer Operation

    SLEEP TIMER OPERATION Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped. To Use the SLEEP Timer To Cancel the Timer: While the air conditioner is operating or stopped, press the Use the TIMER MODE button to select “CAN- SLEEP button (Fig.
  • Page 11: Adjusting The Direction Of Air Circulation

    ADJUSTING THE DIRECTION OF AIR CIRCULATION ● Adjust the up, down, left, and right AIR directions with the AIR DIRECTION buttons on the Remote Control Unit. ● Use the AIR DIRECTION buttons after the Indoor Unit has started operating and the airfl ow-direction louvers have stopped mov- ing.
  • Page 12: Swing Operation

    SWING OPERATION Begin air conditioner operation before performing this procedure. To select SWING Operation Press the SWING button (Fig. 6 T). The SWING Display (Fig. 7 b) will light. Each time the SWING button is pressed, the swing operation will change in the following order.
  • Page 13 CLEANING AND CARE Cleaning the Intake Grille Cleaning the Air Filter 1. Remove the Intake Grille. 1. Open the Intake Grille, and remove the air 1 Place your fi ngers at both lower ends of the grille panel, fi lter. and lift forward;...
  • Page 14 CLEANING AND CARE Air Cleaning Filter Installation Replacing dirty Air cleaning fi lters Replace fi lters with the following components (purchased separately). 1. Open the Intake Grille and remove the Air ● POLYPHENOL CATECHIN AIR CLEANING FILTER : UTR- fi lters. FA13-1 ●...
  • Page 15: Troubleshooting

    TROUBLESHOOTING In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electrical WARNING! breaker or disconnect the power supply plug, and consult authorized service personnel. Merely turning off the unit’s power switch will not completely disconnect the unit from the power source. Always be sure to turn off the electrical breaker or disconnect the power supply plug to ensure that power is completely off.
  • Page 16 TROUBLESHOOTING Symptom Problem See Page CHECK ONCE Doesn’t operate ● Is the Power Supply Plug disconnected its outlet? MORE at all: ● Has there been a power failure? — ● Has a fuse blown out, or a circuit breaker been tripped? ●...
  • Page 17: Operating Tips

    OPERATING TIPS AUTO Restart In Event of Power Interruption ● The air conditioner power has been interrupted by a power ● If a power failure occurs during TIMER operation, the timer will failure. The air conditioner will then restart automatically in be reset and the unit will begin (or stop) operation at the new its previous mode when the power is restored.

This manual is also suitable for:

Aobr24jfc

Table of Contents