Twin Needle (Optional); Embroidery - AEG 3200 User Manual

TWIN NEEDLE (Optional)

Please place second spoon pin (B) into the position for twin needle sewing as page 6,
no. 4 pic.
Put in the twin needle with the flat side backwards.
Thread the machine for normal sewing, leading both threads to needle and passing
their ends separately through its eye.
Sewing width should not exceed the third widest stitch width, as this will break the
needles.
ATTENTION: When using the twin needle, adjust the stitch width to maximally 3.
Adjusting the stitch width to a higher number causes the needle to break.

EMBROIDERY

(Use Darning plate see page 17)
Remove the presser foot and attach the darning plate.
Lower feed dog and move the hooped fabric slowly in the desired direction until the
fabric has been embroidered.
- 31 -