Download Print this page

Mitsubishi Electric par-u02meda Installation Manual page 17

City multi control system smart me controller
Hide thumbs Also See for par-u02meda:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
2
Service Menu
[HOME screen]
A password is required to access the Menu
.
screen
• The initial Service password is "9999." The initial User password is "0000." Change the password
as necessary to prevent unauthorized access.
• Make sure the password is available to the maintenance and other necessary personnel.
• The password can be changed to any four-digit number. On the [Login page], enter the old
password, touch the [Change] button, and then enter a new password.
• If you forget your password, log in with the master password.
Master service and user password: 1056
■Service menu items
Item
Detail
(1) Setup (a) Group
setting
(b) Interlocked
LOSSNAY
(c) Search
connection
information
(d) Cool/Heat
display
(e) Temperature
sensor offset
(f)
Humidity
sensor offset
(g) Room name Use to enter room names (max.
(h) Telephone
number
(i)
IC function
setting
[Menu (User) screen]
Service
(
Description
Make the group setting for the
indoor units, and an AHC
Enters the interlock settings
between indoor and LOSSNAY
units
Use to search and display the
units that are connected to a
specified unit.
Use to show or hide the
operation mode signs (Cool/
Heat) on the HOME screen
while the units are operated in
the Auto mode.
Use to offset the reading on the
built-in temperature sensor. *1
Use to offset the reading on the
built-in humidity sensor.
16 characters). The names
entered here will appear on the
HOME screen.
Use to enter the telephone
number of the maintenance
personnel (max. 13 numbers).
This number will be displayed
on the screen that appears
when an error occurs.
Use to make the settings for the
indoor units from the controller.
* Refer to the indoor unit installation
manual for the detailed
explanation of the setting items.
– 16 –
[Menu (Service) screen]
screen or some settings under the Menu
)
Setting
Refer to section 1
"Initial Settings" (2)
"Setup screen".
Select between Show/
Hide.
Set the offset value.
(-5ºC~+5ºC)
(-10ºF~+10ºF)
Set the offset value.
(-10%~+10%)
Use a combination of
capital letters, small-
case letters, numerical
characters and symbols.
Use numerical
characters and
hyphens.
To be explained later
User
(
)
Default
Auto: Show
Offset: 0.0ºC (0ºF)
Offset: 0%
Blank
Blank

Advertisement

loading