Table of Contents
Advertisement
Power on message(Power
management)
Whether to show/hide an information message that tells
the power has been turned off by Power Management
when the power is set to [On].
[On]: The information is shown at the time of power
[On].
[Off]: The information is not shown at the time of
power [On].
Note
●
This setting is enabled only when "Power
management" function is [On] (see page 47).
Initialization
When both main unit buttons and remote control buttons
are disabled due to the [Button lock], [Controller user
level] and [Controller ID function] settings, set all the
values [Off] so that all the buttons are enabled again.
Press <VOL - (Unit)> together with
<RETURN> and hold for more than 5
seconds.
[Shipping] is displayed and the lock is released when
it disappears.
Shipping
●
Settings for [Button lock], [Controller user level]
and [Controller ID function] will be back to [Off].
63
English
Advertisement
Table of Contents
