Set Up Checklist; Lubrication; Checking The Battery - M.T.H. Premier E33 Electric Engine Operator's Manual

Set Up Checklist

- Lubricate the locomotive
- Check to see whether the battery needs to be charged for full sound effects
- Apply power to run as described in the Basic Operating Section of this manual

Lubrication

You should lubricate the engine to prevent it from squeaking. Use
light household oil and follow the lubrication points marked "L"
shown below. Do not over-oil. Use only a drop or two on each pivot
point.
Lubrication Points on the Locomotive Lubrication Points on the Locomotive

Checking the Battery

You may find, if your locomotive was built several months before you set it up,
that the rechargeable battery has run down and needs to be charged before
operating. If you notice that the sounds are g arbled, test and charge the engine as
described in the "Self-Charging Battery Back-Up" on page 14.
Lubricate Pick Up Roller Axles (L)
Premier E33 Electric Engine with PS-2
3
DO NOT DO NOT DO NOT
OVER OIL OVER OIL
OVER OIL
Lubricate All Wheel Axles (L)