Hotpoint CH60EKK Use And Installation Instructions page 12

ELECTRONIC CLOCK & AUTOMATIC OVEN
SETTING THE TIME OF DAY
Step 1 Make sure all oven controls are turned Off.
. .
A
0 0 0
U
T
Step 2 Check the electricity supply to the cooker is turned on.
O
Step 3 When switched on the display will show 0.00 and the Auto symbol, flashing
intermittently.
.
Step 4 Press & hold in both the Cook Period & End Time buttons together.
A
0 0 0
U
T
O
Step 5 With the Cook Period & End Time buttons still held in, press either the "+" or "-"
buttons to set the correct time of day.
Step 6 Release all the buttons simultaneously. THE TIME OF DAY IS NOW SET.
To change the time of day repeat Steps 4, 5 & 6 above.
Note: You cannot adjust the time of day if the timer has been set for an Auto Cooking Programme.
SETTING THE MINUTE MINDER
. Step 1 Ensure the time of day is set correctly.
0 0 0
Step 2 Press and hold the Minute Minder button.
Step 3 With the Minute Minder button held in, set the required Minute Minder period using
the "+" and "-" buttons. A 'bell' symbol will light up.
Release all buttons and the timer display will revert back to the time of day. The 'bell' symbol
will remain lit to signify that a Minute Minder period has been set.
.
At the end of the set time an audible tone will be heard, and the 'bell' symbol will disappear.
A
0 0 0
U
T
O
Step 4 To cancel the audible tone press the Minute Minder button.
Note 1 When the Minute Minder has been set, the time remaining can be checked at any time by simply pressing
the Minute Minder button.
Note 2 If necessary the Minute Minder can be cancelled before the tone sounds by pressing and holding the
Minute Minder button and then at the same time pressing the "-" button until 0.00 appears in the display
window.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
12
TIMER OPERATION