Setting The Temperature Span (Manual) - Fluke Ti32 User Manual

Level
5. To exit the manual level and span adjustment, squeeze and release the
trigger quickly twice in order to return to live view.
The Imager remains at this level until it is manually adjusted again or the
Imager is returned to auto mode.
The scale along the right side of the screen display indicates the
range.

Setting the Temperature Span (Manual)

When put into manual ranging, the span setting adjusts the palette over a
temperature range within the total range of the Imager. See Figure 2. To adjust
the temperature span:
1. After entering the manual range mode (see "Setting the Range"), press the
softkey labeled Go to Span. This will place the Imager into the
Adjusting Span mode.
2. Press the softkey labeled Increase to widen the temperature span or
Decrease to narrow it.
Shop for Fluke products online at:
Figure 2. Range and Span Settings
Note
MyFlukeStore
www.
Thermal Imagers
Adjusting the Thermal Image
Total Imager Range
Span
1.877.766.5412
.com
exj02.eps
21