Selecting An Ultra Contrast Palette; Setting The Range - Fluke Ti32 User Manual

Selecting an Ultra Contrast
Ultra Contrast™ palettes are available for each standard palette listed above.
To select an Ultra Contrast™ palette:
1. Press  until Palette appears over .
2. Press the softkey labeled Palette to display the available palette options
(Standard or Ultra Contrast).
3. Press the softkey labeled Ultra Contrast.
4. Press the softkey labeled Up or Down to move between the palette
options.
5. Press the softkey labeled Done to set the Imager to the selected palette.
6. Wait for main menu to disappear or quickly squeeze and release the
trigger twice in order to return to live view.

Setting the Range

Viewing temperature (level and span) is set either automatically or manually.
To set the range, do the following:
1. Press  until Range appears over .
2. Press the softkey labeled Range.
3. Press the softkey labeled Manual to set the Imager to manual ranging and
press the softkey labeled Auto to select auto ranging.
When operating the Imager in Auto Range Mode, it will automatically
determine a Level and Span based upon the infrared energy that it detects at
any point in time. It re-calibrates automatically as the infrared energy in the
Field of View changes. The temperature measurement scale updates
accordingly, and "Auto" displays in the upper right-hand corner of the LCD.
When operating the Imager in Manual Range Mode, the Level and Span and
the temperature measurement scale will have fixed settings unless the user
chooses to manually adjust the Level and Span, or chooses to perform a Fast
Auto Rescale (see following sections). The temperature measurement scale
indicates "Manual" in the upper right hand corner of the LCD.
Shop for Fluke products online at:

MyFlukeStore
www.
Adjusting the Thermal Image
Palette
.com
Thermal Imagers
1.877.766.5412
19