Adjusting The Thermal Image; Selecting A Standard Palette - Fluke Ti32 User Manual

Ti32, TiR32, Ti29, TiR29, Ti27, TiR27
Users Manual
1. Point camera at the area of interest and pull the trigger to capture an
image. This will freeze the image in the display and bring up the Image
Capture menu.
2. Press the softkey labeled Store. If the SD memory card is in the Imager
and there is enough room left on the card, the information is stored.
Do not remove the SD memory card while storing an
image. Image data may be lost.
Before you store an image, make sure the write protect lock on the SD
memory card is in the open position.

Adjusting the Thermal Image

The Imager uses different colors or shades of gray to display the temperature
gradient of the area within the Imager's field of view. There are two
adjustments for changing how the Imager displays the image: Palette and
Range.

Selecting a Standard Palette

The palette menu provides different thermal viewing patterns. Grayscale, Blue-
Red, High Contrast, Ironbow, Amber, and Hot Metal are available on both
Imagers. To select a standard palette:
1. Press  until Palette appears over .
2. Press the softkey labeled Palette to display the available palette options.
(Standard or Ultra Contrast)
3. Press the softkey labeled Standard.
4. Press the softkey labeled Up or Down to move between the palette
options.
5. Press the softkey labeled Done to set the Imager to the selected palette.
6. Wait for main menu to disappear or quickly squeeze and release the
trigger twice in order to return to live view.
Shop for Fluke products online at:
18
 Caution
Note
MyFlukeStore
www.
1.877.766.5412
.com